Products

 
  • SKU
Product Description
Model FW-5A
SKU : Model FW-5A
Price : $1,128.60
Quantity On Hand : Press Buy Now

The Model FW-5A is equipped with a precision air regulator which enables the process controller output to the heatgun heater element control circuit only if an adequate air source is connected. The process controller is equipped with a digital display which shows the real time temperature of the heated air flowing out from the heatgun element.


The desired air temperature can be programmed into the controller and can be changed as welding conditions vary. The control box is equipped with two separate switches, where the HEAT switch will not work unless the MAIN POWER switch is enabled. Note that the MAIN POWER switch is also an overcurrent protection device.
Model FW-5B
SKU : Model FW-5B
Price : $930.60
Quantity On Hand : Press Buy Now

The Model FW-5B is equipped with a precision air regulator which enables the process controller output to the heatgun heater element control circuit only if an adequate air source is connected. The process controller is potentiometer controlled, from several LOW thru HIGH settings. Heatgun air temperature is controlled by turning the knob clockwise for higher air temperatures.

The control box is equipped with two separate switches, where the HEAT switch will not work unless the MAIN POWER switch is enabled. Note that the MAIN POWER switch is also an overcurrent protection device
Model FW-5C
SKU : Model FW-5C
Price : $1,233.10
Quantity On Hand : Press Buy Now

The Model FW-5C includes an internal air compressor that is incorporated into the control box. The AIR SUPPLY INLET is equipped with an air filter. The process controller is equipped with a digital display which shows the real time temperature of the heated air flowing out from the heatgun element.


The desired air temperature can be programmed into the controller and can be changed as welding conditions vary. The control box is equipped with two separate switches, where the HEAT switch will not work unless the MAIN POWER switch is enabled. Note that the MAIN POWER switch is also an overcurrent protection device.
Model FW-5D
SKU : Model FW-5D
Price : $1,003.20
Quantity On Hand : Press Buy Now

The Model FW-5D includes an internal air compressor that is incorporated into the control box. The AIR SUPPLY INLET is equipped with an air filter. The process controller is potentiometer controlled, from several LOW thru HIGH settings. Heatgun air temperature is controlled by turning the knob clockwise for higher air temperatures.


The control box is equipped with two separate switches, where the HEAT switch will not work unless the MAIN POWER switch is enabled. Note that the MAIN POWER switch is also an overcurrent protection device.
Model 41-HT-350
SKU : Model 41-HT-350
Price : $445.50
Quantity On Hand : Press Buy Now

The Model 41-HT used for tack welding or hand welding with round tips at speeds of approximately 12 inches (300 mm) per minute. It is ideally suited for back welding of pipe , short radii, or hard-to-reach areas. It operates on shop air or inert gas. The standard stainless-steel heating element for this welder is rated at 350 watts. An air regulator, pressure gauge and complete operating and maintenance instructions are furnished. Tips and accessories must be ordered separately.
Model 41-HT-450
SKU : Model 41-HT-450
Price : $456.50
Quantity On Hand : Press Buy Now

The Model 41-HT is used for occassional high-speed welding using 1/8" or 5/32" rod. It operates on shop air or inert gas. The standard stainless-steel heating element for this welder is rated at 450 watts. An air regulator, pressure gauge and complete operating and maintenance instructions are furnished. Tips and accessories must be ordered separately.
Model 42-TM-350
SKU : Model 42-TM-350
Price : $617.10
Quantity On Hand : Press Buy Now

Trainer and maintenance kit which includes Model 41-HT along with a 350 watt stainless steel element, air regulator and pressure gauge, KR round tip, KT tacker tip, aluminum welder stand, and a steel carrying case. This model contains everything needed for training as well as for fabricating and maintenance. Operates on shop air or inert gas.
Model 42-TM-450
SKU : Model 42-TM-450
Price : $638.00
Quantity On Hand : Press Buy Now

Trainer and maintenance kit which includes Model 41-HT along with a 450 watt stainless steel element, air regulator and pressure gauge, KR round tip, KT tacker tip, aluminum welder stand, and a steel carrying case. This model contains everything needed for training as well as for fabricating and maintenance. Operates on shop air or inert gas.
Model 43-HS-600
SKU : Model 43-HS-600
Price : $627.00
Quantity On Hand : Press Buy Now

A heavy-duty welder for medium and high speed welding of thermoplastics with welding speeds up to 60" (1520 mm) per minute. The standard electric stainless steel heating element is rated at 600 watts. This lightweight hot gas welder can be used with all types of weldable thermoplastics having a minimum thickness of 1/16". An air regulator, pressure gauge and complete operating and maintenance instructions are furnished. Tips and accessories must be ordered separately. Additional elements available in 750 or 900 watt ratings. Operates on shop air or inert gas.
Model 43-HS-900
SKU : Model 43-HS-900
Price : $650.10
Quantity On Hand : Press Buy Now

A heavy-duty welder for medium and high speed welding of thermoplastics with welding speeds up to 60" (1520 mm) per minute. The standard electric stainless steel heating element is rated at 900 watts. This lightweight hot gas welder can be used with all types of weldable thermoplastics having a minimum thickness of 1/16". An air regulator, pressure gauge and complete operating and maintenance instructions are furnished. Tips and accessories must be ordered separately. Additional elements available in 600 or 750 watt ratings. Operates on shop air or inert gas.
Model 43-HS-750
SKU : Model 43-HS-750
Price : $639.10
Quantity On Hand : Press Buy Now

A heavy-duty welder for medium and high speed welding of thermoplastics with welding speeds up to 60" (1520 mm) per minute. The standard electric stainless steel heating element is rated at 750 watts. This lightweight hot gas welder can be used with all types of weldable thermoplastics having a minimum thickness of 1/16". An air regulator, pressure gauge and complete operating and maintenance instructions are furnished. Tips and accessories must be ordered separately. Additional elements available in 600 or 900 watt ratings. Operates on shop air or inert gas.
Model 44-AW
SKU : Model 44-AW
Price : $742.50
Quantity On Hand : Press Buy Now

The model 44-AW is the most light-weight and versatile plastic welder available. It can be used both in the shop and in the field for any type of welding ranging from tack welding to high-speed welding. The variable power setting offers versatility in welding a variety of thermoplastics. Operates on shop air or inert gas.
Model 46-RW
SKU : Model 46-RW
Price : $1,005.40
Quantity On Hand : Press Buy Now

Self-contained, portable unit with built-in air compressor in a steel carrying case. This welder cannot be connected to an inert gas supply. Use outdoors or in the shop with thermoplastics 1/16" or more. Has a low-to-high heat selector. Requires 120 volts AC. Model 46-RW is a light-duty welder with a 350-watt heating element for fabricating , maintenance or common repair. The kit includes a KR round tip.
Model 47-RW
SKU : Model 47-RW
Price : $1,169.30
Quantity On Hand : Press Buy Now

Self-contained, portable unit with built-in air compressor in a steel carrying case. This welder cannot be connected to an inert gas supply. Use outdoors or in the shop with thermoplastics 1/16" or more. Has a low-to-high heat selector. Requires 120 volts AC. Model 47-RW is a light-duty welder with a 600-watt heating element for fabricating , maintenance or common repair. The kit includes a KR round tip
eKTI-06900
SKU : eKTI-06900
Price : $390.50
Quantity On Hand : Press Buy Now

1600 Watt Hot Air Welder Especially Suitable For Continuous Use At High Temperature
eKTI-06901
SKU : eKTI-06901
Price : $401.50
Quantity On Hand : Press Buy Now

1600 Watt Hot Air Welder With Labor Saving Handle Grip Especially Suitable For Continuous Use At High Temperature
eKTI-06902
SKU : eKTI-06902
Price : $627.00
Quantity On Hand : Press Buy Now

1600 Watt Digital Display 2 Stage Air Velocity Welder With Automatic Shutdown Function
eKTI-06903
SKU : eKTI-06903
Price : $489.50
Quantity On Hand : Press Buy Now

3000 Watt High Power Hot Air Welder
eKTI-06904
SKU : eKTI-06904
Price : $352.00
Quantity On Hand : Press Buy Now

1000 Watt Hot Air Welder