Description: Kamweld Hot Air Gun Temperature Controller

This product is designed to go on an existing Kamweld Hot Air Gun to control and set the temperature of the hot air gun.

KAM-TC1000™ fits on any Kamweld Gun and controls the temperature within ±2F for the full range of the gun’s temperature range.

The system is composed of

• Sensor port

• Controller


Procedure:

1- Attach your Kamweld gun to compressed air source (either shop air or compressor)

2- Set your pressure regulator at the desired welding air pressure (typically 2-3 psi)

3- Place the Sensor Port at the end of your Kamweld Hot Air Gun

4- Plug the thermocouple connector (10’ long) to the back side of the KAM-TC1000

5- Set your desired welding temperature

6- Attach the desired Kamweld welding tip to the other end of the sensor knob

7- Start welding


 Download the Instruction Manual here.


Input voltage100 to 240 VAC 50 /60 Hz
Output voltageSame as the input
Maximum Current15A at 120V, 12A at 240V
Fuse Size15A Fast blow
Control ModePID (Heating), ON/OFF (Heating/Cooling)
Output switching deviceBuilt-in optically isolated solid state relay with zero voltage crossing switching
Sensor InputK type thermocouple
AlarmHigh limit alarm and Open loop alarm with LED and buzzer
Timer Range1 to 9999 minutes for each step, 6 steps total
Temperature resolution1 °C or 1 °F
Temperature display range-200 to 1300 °C or -200 to 2372 ° F
Temperature control range+5 °C (°F) from room temperature to 1300 °C (2300 °F)
Temperature accuracy0.2% +1°C (0.2% +2°F)
Dimension6 x 3 x 8.3 inch (155 x 80 x 210 mm) W x H x D
Weight3.2 lb (1.5 kg) without power cord

Write a review

Please login or register to review

KAM-TC1000

  • Product Code: KAM-TC1000 Ships in 3 weeks from order
  • Size: (inches) 10.00 x 7.00 x 4.00
  • Availability: Pre-Order
  • $675.00